Your problem starts when the voice Bluetooth component is activated.

Fix for poor A2DP quality for Bluetooth headphones under Windows 8, 8.1 and 10!

I’ve been happily using my Bluebuds X Bluetooth Headphones for the past 6 months without problem between my Windows 7 laptop and Sony Xperia Sola but after updating to Windows 8 this peace has ended in cracking and hissing reminiscent of low quality internet radio.

To resolve this and bring back full A2DP high quality Bluetooth streaming try the following:

  1. Open Devices and Printers from Hardware and Sound within the Control Panel
  2. Expand the Bluetooth headphone listed under Devices by double clicking it
  3. Switch to the Services tab within the Properties dialog
  4. Turn off Hands-free Telephony and click OK

Screenshots

Re-connect to your Bluetooth headphones and play a song from your Windows 8 machine, fingers crossed the hissing is gone! I’ll be updating to APT-X shortly which will do away with reliance on Bluetooth for audio but Bluetooth will still be required for track changes, etc. Hope this helps!

Update: This same fix works for Windows 8.1 and now Windows 10 ๐Ÿ˜€

Published by

Michael Visser

I'm a WordPress Plugin developer, UAV & Raspberry Pi enthusiast and general tinkerer. This visser.io domain serves as my development playground for non-WordPress Plugin projects.

78 thoughts on “Fix for poor A2DP quality for Bluetooth headphones under Windows 8, 8.1 and 10!”

  1. ooooooo thanks god i was so disappointed because of no help .. but finally i fix this shit sound quality prob …. THANKSSSS ALOTTTTTT VISSER

  2. Just to round out some of the “Mic doesn’t work” stuff

    If you just want Music/Audio and you don’t need the mic the above works

    If your issue with the device isn’t the low quality audio, but the fact you can kind of hear yourself, you need to find a way to turn off “Side Tone”. I’ve got a pair of Audiotechnica’s that have this problem. When I connect them to the config app they provide (not on PC) I can turn off “Side Tone” and this setting is “saved” on the headset. Meaning when I go back to my Laptop they’re at this middle ground, where the audio is only okay, but I can’t hear myself anymore, which is fine

    Hope that helps

  3. Another Fix for when “un-checking telephony” does not work:
    Restart/enable bluetooth services per instructions pasted below. Hope this helps!

    AVCTP service ( this is the service I missed and my Sony BT headphones work like normal BT headphones now)
    Prior to this last fix before I gave up, I also updated Windows to the latest 20h2 update and installed/reinstalled BT and realtek audio drivers MANY times.

    Enable Bluetooth Support service on your Windows 10
    The Bluetooth Support Service on your Windows 10 PC may have stopped working or been disabled. If that is the case on your device, follow the steps below to address the concern:

    Launch RUN box by pressing Windows key and R key.
    Type in Services.msc and press ENTER
    From the Services window, locate the Bluetooth support services
    Double click on it to open it.
    Under the General tab, choose Manual for the Start-up Type and click on START under Service Status.
    Click on Apply and then OK.

    https://thetechwired.com/how-to-connect-bluetooth-headphones-to-pc-windows-10/

  4. Thanks Michael , You Legend !!!! Thanks a lot , I ordered my headphones from amazon and was gonna return it and then i saw this post from you . IT WORKS THANK YOU SO MUCH

  5. Brilliant – this needs to be plastered all over the internet. Even on Windows support forums they bang on about drivers & what not instead of just saying check this solution.

  6. ๐Ÿ™ in device manager it still shows triangle! icon when i uncheck telephony. Been trying to research if there is a GPO in our domain blocking this.

    1. Thats the point bluetooth doesnt have high bandwith so it can only deliver high quality audio or poor quality and ur mic

      1. I get perfectly fine audio and decent mic quality. I’ve even had game audio or music playing while my mic was active with no noticeable drop in in quality. I had to reinstall windows and now I have the issue.

  7. did the suggested solution but no sounds coming out from the bluetooth speaker. the speaker worked fine when paired with mobile devices. any suggestion how can i solve this? thanks

  8. Hi,

    A better solution is to disable your internal pc or laptop microphone, for me this solved the sound quality issue and I can still use my headset for conference calls

    Regards

    Wim

  9. Thanks very much for the sharing, this worked for me. Dell XPS13, used to have cracking sound in my Bose earphone QC35II.

  10. Yes it fix’s the audio quality when you disable telephony, but I use my mic and the mic no longer works for voice. So if you want good sound quality voice calls or want to use it with a voip app like Teamspeak over bluetooth, then this fix is as good as a chocolate fireguard

  11. I struggled with this problem for long time. Finally, it’s works!!!(windows 10)

    And now I can enjoy with my headphone again ๐Ÿ™‚

    Thank you very much.

  12. It works, thanks. I’ve been keeping disconnecting and re-connecting hopelessly and in 1/20 times it would connect. Now it works 100%.

    Just register to say how much I appreciate this post. Thank you !!

  13. This fix does not work with the LG HBS750 and Windows 10. Tinny, muffled sound, completely unusable. ๐Ÿ™

  14. You are the mother fucking man !!!! . I struggled with this problem since I bought my new computer . its really amazing how no one from Microsoft or dell knew how to fix this . I have xps 13 and USB BL dongle was not an option as I have only two.

    Bose AE 2 Wireless
    XPS 13 DELL

      1. also chipping for praise. been round and round the internet for a few hours and here is the simple solution to my problem:

        my bluetooth device switched to “channel 1: 8000Hz (telephone quality)”, now back to normal.

  15. Hey, a big THANK YOU from Italy, solved my issue and prevented me to buy a new BT usb key. I thought my pc wasn’t compatible with A2DP and, instead, it was just a setting to change ๐Ÿ™‚

  16. thank you !! sooo much,finally i can use my bt headset with my laptop i had all but given up on it after buying two different ones and both suffered from inexplicable lag,stutter and cut offs.

  17. I have headphones with mic and if I turn off this then i canot use my mic ๐Ÿ™ if I wanna use mic then my headphones are gone :/

    1. Wonter, unfortunately you cannot have both using Bluetooth as by disabling telephony we can allocate all bandwidth to audio quality.

      1. And yet it works on every smartphone on the planet exactly this way. Interesting that its just not possible on a PC

  18. Thank you, thank you, thank you! Just connected my Bose Soundlink headphones and was feeling pretty disappointed. Then I found this!

  19. A quick shortcut for this is right-click on the speaker icon in you taskbar and choose playback devices.

    @Heathz, I don’t think there’s a work around for this. I believe (someone correct me if I’m wrong) that Bluetooth has two channels available. If you’re in hands free mode, you get one for mic and one for audio (hence the bad audio quality), if you choose audio playback mode, then both channels are used for audio, giving you better quality (but no mic). You may be able to get higher quality bluetooth headsets that have more channels available…

  20. When I do the steps you said I can hear perfectly but the mic stop working.
    If I open the Sound Properties, when i’m at the Playback tab I can hear perfectly but the mic stops… if I change to the recording tab I stop listen and the mic starts work!
    Is there another workaround for this?

  21. WOOT WOOT!!!!! thanks i’ve been looking for driver updates, firmware updates, anything to fix this. i would have never suspect that it was cause by a OS bug

  22. Thank you very much!! I was so frustated with my new headphones I thought there was something wrong with them, I was really close to go to store and ask for a change or something. Really Thank you very much great post easy to follow directions. keep up the good work!

Leave a Reply to ace Cancel reply

Your email address will not be published. Required fields are marked *